WRX Contact Cleaner 400 ml

WRX Contact Cleaner

Product Description

High quality spray to clean electrical contacts.

Application

• Switches
• Batteries
• Contact Points
• Printed Circuit Board Switches
• Multiple Sockets

Product Characteristics

• High dissolving properties Leaves no residue
• Non-conductive
• Non-corrosive
• 360° valve
• Powerful jetspray

Physical and Chemical Characteristics

• Contents                                                     : 400 ml
• Basis                                                           : Aliphatic Hydrocarbons with alcohol
• Propellant                                                   : Carbondioxide
• Colour                                                         : Transparent
• Scent                                                          : Characteristic
• Relative density at 20°C                             : 0,73 g/ml
• Yield                                                           : 3,8 g/sec
• Refractive Index at 20°C                            : 1,370
• Vapour pressure at 20°C                            : 5,5 to 6,5 bar
• VOC Content                                              : Approximately 97% w/w

Usage

Before use,carefully read the directions on the packaging and act accordingly

The aerosol should have room temperature.
Best processing temperature 5 to 30°C.
Before use, shake the aerosol.

Switch off electrical installations before treatment.
Spray the parts to be treated until the contamination has disappeared.
Contaminated contact cleaner should be regarded as chemical waste.
Only switch on the electrical installation after evaporation of the solvent (minimum of 15 minutes).